CIRCUIT BREAKER SENSOR INSPECTION


  1. INSPECT NO. 1 CIRCUIT BREAKER SENSOR


    1. A01NCWNE11
      Text in Illustration
      *1

      Component without harness connected

      (No. 1 Circuit Breaker Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard resistance
      Tester Connection Switch Condition Specified Condition
      1(SIF-) - 2(SIF+) Power switch off (20°C (68°F)) 0.65 to 1.0 kΩ

      If the result is not as specified, replace the No. 1 circuit breaker sensor.