WATER PUMP WITH MOTOR REMOVAL


  1. PRECAUTION

    Tech Tips

    Click here.

  2. REMOVE NO. 1 ENGINE UNDER COVER

  3. DRAIN COOLANT (for Inverter)

    Note


    • Do not reuse the drained coolant because it may contain foreign objects.

    • Collect the drained coolant and measure its volume to establish a benchmark. When adding coolant, make sure to add more coolant than the measured amount.


    1. Remove the inverter reserve tank cap.

      CAUTION:

      To avoid the danger of being burned, do not remove the inverter reserve tank cap while the coolant for the inverter is still hot.

    2. A01NDPX

      Loosen the drain plug indicated in the illustration and drain the coolant.

      CAUTION:

      Use caution when handling coolant immediately after driving or in summer because it may be hot.

    3. Tighten the plug.

  4. REMOVE INVERTER WATER PUMP ASSEMBLY


    1. A01NFW9

      Remove the bolt, and separate the inverter water pump assembly.

    2. A01NF4J

      Disconnect the connector and 2 water hoses, and remove the inverter water pump assembly.