MOTOR GENERATOR CONTROL COMPUTER PRECAUTION

Note

Observe the following in order to prevent entry of foreign matter:

• Do not allow foreign matter such as grease, oil or water to adhere to the inside of the inverter with converter assembly.

• Do not use air tools in areas other than specified to prevent entry of dust.

• Prevent wind from blowing through the workshop to prevent entry of dust.

• Do not drop any bolts or tools into the inverter with converter assembly.

• Clean the tools before use.

Note

PRECAUTION WHEN HANDLING ELECTRONIC COMPONENTS

• Do not touch any connector terminals or circuit boards, as static electricity may be applied to the internal circuits.

• Do not drop electronic components such as circuit boards or subject them to impact.

• Keep the removed parts free from dust.

• Electronic components are very sensitive. Be sure to observe the handling instructions.

Note

PRECAUTION WHEN HANDLING PARTS

• Do not drop parts or subject them to impact.

• Be sure to observe the handling instructions to prevent parts from being damaged.

Note

PRECAUTION WHEN SUSPENDING WORK

• If suspending work, cover parts with clean pieces of paper to prevent entry of dust and foreign matter.