ACCELERATOR PEDAL SENSOR ON-VEHICLE INSPECTION


  1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menu items: Powertrain / Hybrid Control / Data List / Accel Pedal Pos #1, Accel Pedal Pos #2.

    5. A01NDLEE01
      Text in Illustration
      *1 Accelerator Pedal Position Sensor Output Voltage (V)
      *2 Accelerator Pedal Fully Released
      *3 Accelerator Pedal Fully Depressed
      *4 Accelerator Pedal Turning Angle (°)

      Read the Data List.

      Result
      Tester Display Accelerator Pedal Condition Specified Condition
      Accel Pedal Pos #1 Not depressed 8 to 28% (0.4 to 1.4 V)
      Fully depressed 62 to 92% (3.1 to 4.6 V)
      Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively as shown in the illustration
      Accel Pedal Pos #2 Not depressed 20 to 44% (1.0 to 2.2 V)
      Fully depressed 78 to 100% (3.9 to 5.0 V)
      Not depressed → Fully depressed → Not depressed (Accelerator pedal should be operated slowly) Value changes progressively as shown in the illustration

      Tech Tips

      5 V is described as 100% on the tester.

      If the result is not as specified, check the accelerator pedal sensor assembly, wire harness or power management control ECU.