HEATED OXYGEN SENSOR REMOVAL


  1. PRECAUTION (w/ Air Suspension)

    Note

    Be sure to read Precaution thoroughly before servicing Click here.

  2. REMOVE FRONT FLOOR COVER LH


    1. A01NH2WE01
      Text in Illustration
      *1 Bolt
      *2 Screw

      Remove the clip (A).

    2. Disconnect the 2 clips (B).

    3. Remove the 2 screws, 4 bolts and front floor cover LH.

  3. REMOVE OXYGEN SENSOR


    1. A01NDOD

      Disconnect the 2 wire harness clamps and oxygen sensor connector.

    2. A01NGP8

      Disconnect the wire harness clamp.

    3. A01NF3CE01

      Using SST, remove the oxygen sensor from the No. 3 front exhaust pipe sub-assembly.

      SST
      09224-00010

  4. REMOVE NO. 3 FRONT EXHAUST PIPE SUB-ASSEMBLY


    1. A01NDTU

      Remove the 2 bolts and 2 compression springs.

    2. A01NHAK

      Remove the 2 bolts, 2 nuts and No. 3 front exhaust pipe sub-assembly.

    3. Remove the 3 gaskets from the No. 3 front exhaust pipe sub-assembly.

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01NE9S

      Disconnect the clamp and No. 2 oxygen sensor connector (for Bank 2 Sensor 2).

    2. A01NEJVE01

      Loosen the bolt (A).

    3. Remove the 2 bolts (B), 2 nuts and front exhaust pipe assembly.

    4. Remove the gasket from the front exhaust pipe assembly.

  6. REMOVE NO. 2 OXYGEN SENSOR


    1. A01NDROE02

      Using SST, remove the No. 2 oxygen sensor from the front exhaust pipe assembly.

      SST
      09224-00010