AIR FUEL RATIO SENSOR INSTALLATION

INSTALL AIR FUEL RATIO SENSOR NO.2 (for Bank 2 Sensor 1)

1. 

   Text in Illustration

   *1	Fulcrum Length 30 mm
   *2	Fulcrum Length 300 mm

   Using SST, install the air fuel ratio sensor to the exhaust manifold LH.

   SST

   09224-00010

   Torque:

   without SST

   44 N*m  { 449 kgf*cm, 32 ft.*lbf }

   with SST

   40 N*m  { 408 kgf*cm, 30 ft.*lbf }

   Note

   
   

   • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).

   • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

   • The "with SST" torque value is effective when SST is parallel to the torque wrench.

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

SST

09224-00010

Torque:

without SST

44 N*m  { 449 kgf*cm, 32 ft.*lbf }

with SST

40 N*m  { 408 kgf*cm, 30 ft.*lbf }

INSTALL EXHAUST MANIFOLD

1. Install the exhaust manifold Click here.