CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANK POSITION SENSOR


    1. A01NDF7E03
      Text in Illustration
      *1 O-ring

      Apply a light coat of engine oil to the O-ring on the crank position sensor.

    2. A01NF7L

      Install the crank position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the crank position sensor connector.

  2. INSTALL WITH MOTOR COMPRESSOR ASSEMBLY


    1. Install the compressor and magnetic clutch Click here.