MASS AIR FLOW METER REMOVAL


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Remove the windshield wiper motor and link assembly Click here.

  2. REMOVE FRONT SHOCK ABSORBER CAP (w/ Air Suspension)


    1. A01NHTO

      Remove the 3 nuts and front shock absorber cap.

  3. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)


    1. A01NHCW

      Disconnect the connector (w/ Windshield Deicer).

    2. Disengage the grommet and clamp, and separate the wire harness.

    3. A01NFEQ

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)


    1. A01NDEN

      Disconnect the connector (w/ Windshield Deicer).

    2. Disengage the grommet and clamp, and separate the wire harness.

    3. A01NF0Q

      Remove the 6 nuts, 4 bolts and outer cowl top panel sub-assembly.

  5. REMOVE MASS AIR FLOW METER


    1. A01NG3O

      Disconnect the mass air flow meter connector.

    2. Remove the 2 screws and mass air flow meter.