DESCRIPTION
This DTC is stored when a malfunction occurs in a connected device.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1585 | When one of the conditions below is met.
|
|
INSPECTION PROCEDURE
Tech Tips
After the inspection is completed, clear the DTCs.
PROCEDURE
REPLACE USB DEVICE OR "iPod"
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the power switch off.
Tech Tips
When this DTC has been stored, it is necessary to turn off the power switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the power switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
Tech Tips
If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.
Refer to System Description for compatible formats and versions Click here.
| NEXT |
|
CLEAR DTC
Clear the DTCs Click here.
| NEXT |
|
CHECK DTC
Recheck for DTCs Click here.
Tech Tips
If DTCs are detected frequently, replace the multi-media interface ECU.
| OK |
|---|
| No DTC is output. |
| NG |
|
REPLACE MULTI-MEDIA INTERFACE ECU Click here |
| OK |
|
USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR USB DEVICE OR "iPod" WAS DEFECTIVE