STEERING COLUMN ASSEMBLY REASSEMBLY


  1. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (for LHD)


    1. A01NFJK

      Install the multiplex tilt and telescopic ECU with the bolt.

      Torque:
      2.8 N*m  { 29 kgf*cm, 25 in.*lbf }
    2. A01NH6T

      Connect the connector to the multiplex tilt and telescopic ECU.

  2. INSTALL MULTIPLEX TILT AND TELESCOPIC ECU (for RHD)


    1. A01NFXG

      Install the multiplex tilt and telescopic ECU with the bolt.

      Torque:
      2.8 N*m  { 29 kgf*cm, 25 in.*lbf }
    2. A01NH06

      Connect the connector to the multiplex tilt and telescopic ECU.

  3. INSTALL STEERING LOCK ACTUATOR ASSEMBLY


    1. A01NFGA

      Temporarily install the steering lock actuator assembly with 2 new tapered-head bolts.

    2. Tighten the 2 tapered-head bolts until the bolt heads break off.