STEERING LOCK SYSTEM PRECAUTION


  1. NOTICE FOR INITIALIZATION:

    Note

    When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

    System Name See Procedure
    Parking Assist Monitor System

    Click here

    Side Monitor System
    Back Door Closer System
    Power Back Door System

  2. PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM


    1. After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.

    2. After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.

      Operation Confirmation
      Steering Lock Condition Operation Condition
      Lock With the power switch off, open and close any door.
      Unlock Turn the power switch from off to on (IG) or on (ACC).