POWER STEERING ECU INSTALLATION


  1. INSTALL POWER STEERING ECU ASSEMBLY (for RHD)


    1. A01NFXK

      Install the relay block sub-assembly.

    2. A01NE3C

      Connect the 3 connectors to the power steering ECU assembly.

    3. A01NE7Q

      Securely connect the connector to the power steering ECU assembly.

      Tech Tips

      Return the lock lever to its original position to connect the connector, and then securely push in the lock of the lock lever as shown in the illustration.

    4. A01NHES

      Install the power steering ECU assembly with the 3 nuts and clamp.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL POWER STEERING ECU ASSEMBLY (for LHD)


    1. A01NGR5

      Install the relay block sub-assembly.

    2. A01NFTH

      Securely connect the connector to the power steering ECU assembly.

      Tech Tips

      Return the lock lever to its original position to connect the connector, and then securely push in the lock of the lock lever as shown in the illustration .

    3. A01NCQG

      Connect the 3 connectors to the power steering ECU assembly.

    4. A01NHX3

      Install the power steering ECU assembly with the 2 nuts and clamp.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  3. INSTALL CONNECTOR HOLDER (for RHD)


    1. A01NET0

      Install the connector holder with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  4. INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for LHD)


    1. Connect the connectors to the back of the instrument panel junction block assembly.

    2. A01NEWG

      Install the instrument panel junction block assembly with the 2 nuts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the connectors to the instrument panel junction block assembly.

  5. INSTALL AFS ECU (for LHD)

    Tech Tips

    Refer to the instructions for Installation of the AFS ECU Click here.

  6. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for LHD)

    Tech Tips

    Refer to the instructions for Installation of the brake pedal support sub-assembly Click here.

  7. INSTALL BRAKE PEDAL SUPPORT SUB-ASSEMBLY (for RHD)

    Tech Tips

    Refer to the instructions for Installation of the brake pedal support sub-assembly Click here.

  8. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT

    Tech Tips

    Click here

  9. INSPECT SRS WARNING LIGHT

    Tech Tips

    Click here