PARKING BRAKE CABLE INSTALLATION


  1. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for LHD)


    1. A01NEPC

      Pass the No. 1 parking brake cable assembly through the parking brake pedal.

    2. Bend the parking brake pedal claw.

    3. A01NEDY

      Install the clip to the No. 1 parking brake cable assembly.

    4. A01NFTW

      Temporarily install the adjusting nut.

  2. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY (for RHD)


    1. A01ND84

      Pass the No. 1 parking brake cable assembly through the parking brake pedal.

    2. Bend the parking brake pedal claw.

    3. A01NEXJ

      Install the clip to the No. 1 parking brake cable assembly.

    4. A01NDW9

      Temporarily install the adjusting nut.

  3. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for LHD)

    Tech Tips

    Refer to the instructions for Installation of the parking brake control pedal assembly Click here.

  4. INSTALL PARKING BRAKE CONTROL PEDAL ASSEMBLY (for RHD)

    Tech Tips

    Refer to the instructions for Installation of the parking brake control pedal assembly Click here.

  5. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY


    1. Install the parking brake cable support bracket, cable support bracket and No. 2 cable support bracket to the No. 2 parking brake cable assembly.

      A01NG7LE01
      Text in Illustration
      *1 Parking Brake Cable Support Bracket *2 Cable Support Bracket
      *3 No. 2 Cable Support Bracket - -

    2. Install the No. 2 parking brake cable assembly with the 5 bolts.

      A01NFM3E01
      Torque:
      Bolt (A)
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
      Bolt (B)
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
      Bolt (C)
      19 N*m  { 192 kgf*cm, 14 ft.*lbf }
    3. A01NEVM

      Install the No. 2 parking brake cable assembly to the backing plate with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  6. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. Install the No. 1 parking brake cable support bracket, No. 2 parking brake cable support bracket and No. 2 cable support bracket to the No. 3 parking brake cable assembly.

      A01NG8CE01
      Text in Illustration
      *1 No. 1 Parking Brake Cable Support Bracket *2 No. 2 Parking Brake Cable Support Bracket
      *3 No. 2 Cable Support Bracket - -

    2. Install the No. 3 parking brake cable assembly with the 4 bolts and nut.

      A01NEU2E01
      Torque:
      Bolt (A)
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
      Bolt (B)
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
      Bolt (C)
      19 N*m  { 192 kgf*cm, 14 ft.*lbf }
      Nut
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    3. A01NCT0

      Install the No. 3 parking brake cable assembly to the backing plate with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

  7. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY WITH PARKING BRAKE SHOE LEVER

    Tech Tips

    Refer to the procedures from "Install No. 2 Parking Brake Shoe Assembly with Parking Brake Shoe Lever" Click here.

  8. INSPECT BRAKE WARNING LIGHT


    1. When operating the parking brake pedal, check that the brake warning light illuminates.

      Standard
      The brake warning light always illuminates at the first click.