REAR BRAKE DISASSEMBLY


  1. REMOVE REAR DISC BRAKE PISTON


    1. A01NECE

      Place a piece of cloth between the rear disc brake piston and rear disc brake cylinder assembly.

    2. Apply compressed air to remove the rear disc brake piston from the rear disc brake cylinder assembly.

      CAUTION:

      Do not place your fingers in front of the rear disc brake piston when using compressed air.

      Note

      Do not allow any brake fluid to spatter.

  2. REMOVE CYLINDER BOOT


    1. A01NCLRE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the cylinder boot.

      Note

      Be careful not to damage the rear disc brake cylinder assembly.

  3. REMOVE PISTON SEAL


    1. A01NFI6E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, remove the piston seal from the rear disc brake cylinder assembly.

      Note

      Be careful not to damage the inner cylinder or cylinder groove.

  4. REMOVE REAR DISC BRAKE BLEEDER PLUG CAP


    1. Remove the bleeder plug cap from the rear disc brake bleeder plug.

  5. REMOVE REAR DISC BRAKE BLEEDER PLUG


    1. Remove the rear disc brake bleeder plug from the rear disc brake cylinder assembly.