BRAKE MASTER CYLINDER (for RHD) DISASSEMBLY


  1. REMOVE MASTER CYLINDER PUSH ROD CLEVIS


    1. A01NETR

      Loosen the lock nut, and remove the master cylinder push rod clevis and lock nut.

      Tech Tips

      If the protrusion of the push rod in relation to the push rod clevis is measured beforehand, it is easier to perform the brake pedal height adjustment after the brake master cylinder sub-assembly is installed.

  2. REMOVE BRAKE MASTER CYLINDER UNION


    1. A01NCY0

      Remove the screw and brake master cylinder union from the brake master cylinder sub-assembly.

  3. REMOVE MASTER CYLINDER RESERVOIR GROMMET


    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder union.

  4. REMOVE BRAKE STROKE SIMULATOR CYLINDER SUB-ASSEMBLY


    1. A01NHR3

      Disconnect the clamp to separate the connector.

    2. Remove the 2 bolts and brake stroke simulator cylinder sub-assembly from the brake stroke simulator bracket.