BRAKE PEDAL (for LHD) REASSEMBLY


  1. INSTALL STOP LIGHT SWITCH CUSHION


    1. Install the stop light switch cushion to the brake pedal sub-assembly.

  2. INSTALL BRAKE PEDAL BUSHING


    1. Apply lithium soap base glycol grease to 2 new brake pedal bushings.

    2. Install the 2 brake pedal bushings to the brake pedal sub-assembly.

  3. INSTALL BRAKE PEDAL SHAFT COLLAR


    1. Install the brake pedal shaft collar to the brake pedal sub-assembly.

  4. INSTALL BRAKE PEDAL SUB-ASSEMBLY


    1. A01NDQ4

      Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut as shown in the illustration.

      Torque:
      37 N*m  { 375 kgf*cm, 27 ft.*lbf }

  5. INSTALL BRAKE PEDAL PAD


    1. Install the brake pedal pad.