BRAKE CONTROL POWER SUPPLY INSTALLATION

Note

While the battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door courtesy switch is turned on. Therefore, when servicing the brake system components, do not depress the brake pedal or open/close the doors while the battery is connected.


  1. INSTALL BRAKE CONTROL POWER SUPPLY ASSEMBLY


    1. A01NE19

      Install the No. 2 control power supply bracket and No. 1 control power supply bracket with the 4 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note

      Do not drop the brake control power supply. If the brake control power supply has been dropped, replace the brake control power supply with a new one.

  2. INSTALL BRAKE CONTROL POWER SUPPLY WITH BRACKET


    1. A01NH27

      Connect the connector.

    2. A01NGWB

      Install the brake control power supply with bracket with the 3 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }
    3. A01NGWN

      Install the 2 clamps.

  3. INSTALL REAR FLOOR FINISH PLATE


    1. A01NCOE

      Engage the 6 clips, 2 claws and 2 guides, and install the rear floor finish plate.

  4. INSTALL FRONT DECK FLOOR BOX


    1. A01NH34

      Install the front deck floor box with the clip.

  5. INSTALL DECK SIDE TRIM BOX LH (for Compact Spare Tire)


    1. A01NGES

      Install the deck side trim box LH with the 2 clips.

  6. INSTALL DECK SIDE TRIM BOX LH (for Full Size Spare Tire)


    1. A01NDD3

      Install the deck side trim box LH with the 3 clips.

  7. INSTALL DECK SIDE TRIM BOX RH (for Compact Spare Tire)


    1. A01NHZ2

      Install the deck side trim box RH with the 2 clips.

  8. INSTALL DECK SIDE TRIM BOX RH (for Full Size Spare Tire)


    1. A01NE2M

      Install the deck side trim box RH with the 3 clips.

  9. INSTALL TONNEAU COVER ASSEMBLY


    1. Install the tonneau cover assembly.

  10. INSTALL NO. 3 REAR FLOOR BOARD (for Compact Spare Tire)


    1. A01NFBL

      Engage the 2 guides and install the No. 3 rear floor board.

  11. INSTALL NO. 3 REAR FLOOR BOARD (for Full Size Spare Tire)


    1. A01ND35

      Engage the 2 guides and install the No. 3 rear floor board.

  12. INSTALL NO. 4 REAR FLOOR BOARD (for Compact Spare Tire)


    1. A01NGX9

      Engage the 2 guides and install the No. 4 rear floor board.

  13. INSTALL NO. 4 REAR FLOOR BOARD (for Full Size Spare Tire)


    1. A01ND4C

      Engage the 2 guides and install the No. 4 rear floor board.

  14. INSTALL SPARE WHEEL COVER ASSEMBLY


    1. Install the spare wheel cover assembly.

  15. INSTALL DECK BOARD SUB-ASSEMBLY


    1. for Compact Spare Tire:


      1. A01NGS3

        Install the deck board sub-assembly with the 2 bolts.

    2. for Full Size Spare Tire:


      1. A01NEZN

        Install the deck board sub-assembly with the 2 bolts.

    3. A01NGS9

      Engage the 3 fasteners as shown in the illustration.

  16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  17. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.