AUDIO AND VISUAL SYSTEM (w/ Navigation System) USB Audio System Recognition/Play Error

INSPECTION PROCEDURE

Tech Tips


  • When a large amount of data is in a USB device, it may take a while to before play begins.

  • When using a USB device, files that are copy protected or encrypted cannot be played.

  • When files are not played in the sorted order, perform the following procedure before inspection.


    1. Add numbers in front of the file names.

    2. Put the files in a folder and copy the folder data to the USB device.

PROCEDURE


  1. CHECK USB DEVICE OR "iPod"


    1. Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.

    2. Check if playable files are present on the USB device or "iPod".

      Tech Tips

      Refer to System Description for playable files Click here.

    3. Check if the USB device is a compatible format or "iPod" is a compatible version.

      Tech Tips

      Refer to System Description for compatible formats and versions Click here.

      Result
      Result Proceed to
      No playable files exist, or incompatible device format or version A
      Playable files exist, and compatible device format or version B

    B

    FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK Click here

    A

    USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR NO PLAYABLE FILES PRESENT

  2. FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK


    1. Delete all files in the USB device or "iPod" and format/ restore it.

    2. Save the data again and check if it can be played on the in-vehicle device.

      OK
      Malfunction disappears.

    NG

    REPLACE USB DEVICE OR "iPod" Click here

    OK

    END

  3. REPLACE USB DEVICE OR "iPod"


    1. Turn the power switch off.

    2. Turn the power switch on (ACC).

    3. Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

      Tech Tips


      • If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

      • Refer to System Description for compatible formats and versions Click here.


    NEXT

  4. CHECK USB DEVICE OR "iPod"


    1. Check if USB device or "iPod" is recognized by display and navigation module display, or if information such as track, artist and album names are displayed on screen.

      OK
      USB device or "iPod" is recognized or track information such as track, artist and album names are displayed.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    USB DEVICE OR "iPod" WAS INCOMPATIBLE OR DEFECTIVE