ГЕНЕРАТОР УСТАНОВКА


  1. INSTALL GENERATOR ASSEMBLY


    1. A01182A

      Temporarily install the generator assembly with the bolt.

    2. A0117T0E01

      Temporarily install the fan belt adjusting bar with bolt A and bolt B.

    3. Tighten bolt B with the generator assembly near the cylinder block.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }
    4. A011736

      Install the 2 brackets with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    5. A0119FE

      Connect the connector and wire harness clamps.

    6. Install the terminal B with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 in.*lbf }

    7. Install the terminal cap.

  2. INSTALL FAN AND GENERATOR V BELT

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }