РЫЧАГ ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ РЕГУЛИРОВКА


  1. ADJUST SHIFT LEVER POSITION


    1. Remove the console panel upper Click here.

    2. Move the shift lever to N.

    3. A011ALNE01
      Text in Illustration
      *1 Adjuster Case
      *2 Cover

      Slide the adjuster case cover in the direction shown by the arrow.

    4. Using a precision screwdriver, pull up the lock piece.

      Text in Illustration
      *3 Lock Piece
    5. A0117N3E01
      Text in Illustration
      *1 Adjuster Case
      *2 Lock Piece
      *3 Cable Rod

      Press the lock piece into the adjuster case.

      Tech Tips

      Lightly pull the cable rod towards the back of the vehicle to eliminate slack, and then lock the adjuster.

    6. Slide the adjuster case cover in the direction shown by the arrow.

      Text in Illustration
      *1 Adjuster Case
      *4 Cover

      Note

      If the cover is not pushed over the protrusion on the lock, the cable will not lock and shift operation will not be accurate.

    7. Install the console panel upper Click here.