ДАТЧИК ОБОРОТОВ (NOUT) УСТАНОВКА


  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NOUT SENSOR)


    1. A0118WY

      Apply Toyota Genuine CVT Fluid TC to a new O-ring and install it on the transmission revolution sensor (NOUT).

    2. Install the transmission revolution sensor (NOUT) onto the CVT with a new bolt.

      Torque:
      4.4 N*m  { 45 kgf*cm, 39 in.*lbf }

    3. Connect the transmission revolution sensor connector (NOUT).

  2. INSTALL AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY

  3. INSTALL AIR CLEANER AND HOSE

    A0119MCE01
    Text in Illustration
    *1 Clamp
    *2 Guide

    1. Align the 2 hinges with the case guide, to insert the case into the groove, and engage the 2 clamps to install the air cleaner cap.

    2. Connect the air cleaner hose with the hose clamp.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

      Tech Tips

      Install the clip as shown in the illustration.

    3. Connect the ventilation hose with the clip

      Tech Tips

      Install the clip as shown in the illustration.

  4. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK


    1. Очистите зону и проверьте, нет ли утечек жидкости.