ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ УСТАНОВКА


  1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. Using a 27 mm deep socket wrench, install the park/neutral position switch assembly with a new gasket to the manual transaxle assembly.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

    2. Connect the park/neutral position switch assembly connector.

  2. INSTALL ENGINE UNDER COVER LH


    1. Install the engine under cover LH with the 3 clips.

  3. INSTALL FRONT TIRE LH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }