БЛОК СЦЕПЛЕНИЯ (для EE65) СНЯТИЕ

Note

When the transaxle is removed, be sure to use a new clutch release with bearing cylinder assembly and new installation bolts. Removal of the transaxle allows the compressed clutch release with bearing cylinder assembly to return to its original position, and dust could damage the seal of the clutch release with bearing cylinder assembly, possibly causing clutch fluid leaks.


  1. REMOVE MANUAL TRANSAXLE ASSEMBLY


    1. Remove the manual transaxle assembly Click here.

  2. REMOVE NO. 1 CLUTCH HOUSING COVER

    A01182D

    1. Remove the No. 1 clutch housing cover from the transaxle.

  3. REMOVE ACCUMULATOR TO FLEXIBLE HOSE TUBE


    1. A01188T

      Using a union nut wrench 10 mm, separate the accumulator to flexible hose tube from the clutch accumulator.

    2. Remove the bolt and accumulator to flexible hose tube.

  4. REMOVE BLEEDER TO ACCUMULATOR TUBE


    1. A01188D

      Using a union nut wrench 10 mm, remove the bleeder to accumulator tube.

  5. REMOVE CLUTCH ACCUMULATOR ASSEMBLY


    1. A0118GK

      Remove the 3 bolts and clutch accumulator.

  6. REMOVE CLUTCH RELEASE BLEEDER SUB-ASSEMBLY

    A0119X3

    1. Using a union nut wrench 10 mm, separate the clutch release bleeder from the bleeder clutch release tube.

    2. Remove the 2 bolts and clutch release bleeder.

  7. REMOVE RELEASE CYLINDER BLEEDER PLUG CAP

  8. REMOVE RELEASE CYLINDER BLEEDER PLUG

  9. REMOVE CLUTCH TUBE BOOT


    1. Remove the clutch tube boot from the transaxle.

  10. REMOVE CLUTCH RELEASE WITH BEARING CYLINDER ASSEMBLY

    A0119WU

    1. Remove the 3 bolts and the clutch release with bearing cylinder assembly together with the bleeder clutch release tube.

  11. REMOVE BLEEDER CLUTCH RELEASE TUBE

    A011BBX

    1. Using a union nut wrench 10 mm, remove the clutch release tube from the clutch release with bearing cylinder assembly.

  12. REMOVE CLUTCH FLEXIBLE HOSE BRACKET

    A0118XD

    1. Remove the bolt clutch flexible hose bracket.

  13. REMOVE CLUTCH COVER ASSEMBLY

    A0118L5E01
    Text in Illustration
    *1 Matchmark

    1. Put the matchmarks on the clutch cover and the flywheel.

    2. Loosen each set bolt one turn at a time until the spring tension is released.

    3. Remove the set bolts and pull off the clutch cover.

      Note

      Do not drop the clutch disc.

  14. REMOVE CLUTCH DISC ASSEMBLY