ЗАМОК ЗАЖИГАНИЯ ПРОВЕРКА


  1. INSPECT IGNITION SWITCH ASSEMBLY


    1. A011BN8E01
      Text in Illustration
      *1

      Component without harness connected

      (Ignition Switch)
      *2 LOCK
      *3 ACC
      *4 ON
      *5 START

      Check the ignition switch resistance.


      1. Measure the resistance according to the value (s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        Between all terminals LOCK 10 kΩ or higher
        2 (AM1) - 3 (ACC) ACC Below 1 Ω
        2 (AM1) - 3 (ACC) - 4 (IG1) ON Below 1 Ω
        6 (IG2) - 7 (AM2)
        1 (ST1) - 2 (AM1) - 4 (IG1) START Below 1 Ω
        6 (IG2) - 7 (AM2) - 8 (ST2)