ДАТЧИК УРОВНЯ МАСЛА СНЯТИЕ


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil drain plug and drain the oil into a container.

    3. Clean the oil drain plug.

    4. Install the oil drain plug with a new gasket.

      Torque:
      38 N*m  { 387 kgf*cm, 28 ft.*lbf }

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY


    1. A011BF4

      Remove the oil pan drain plug and the gasket.

    2. Remove the 10 bolts and 2 nuts.

    3. A0117XBE02
      Text in Illustration
      *1 Oil Pan Seal Cutter

      Insert the oil pan seal cutter blade between the oil pan and No. 2 oil pan, and cut off the applied sealer. Remove the No. 2 oil pan.

      Note

      Do not damage the oil pan or No. 2 oil pan.

  3. REMOVE ENGINE OIL LEVEL SENSOR

    A011A80

    1. Remove the 5 bolts and the engine oil level sensor.