АДСОРБЕР ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ


  1. CHECK CHARCOAL CANISTER


    1. Inspect the ventilation of the canister.


      1. A011842E01

        Open the fuel tank cap and apply compressed air into the purge hose.

        OK
        The air flows out from the No. 1 charcoal canister outlet hose.
      2. A011B79E02

        Open the fuel tank cap and apply compressed air into the No. 1 charcoal canister outlet hose.

        OK
        The air flows out from the purge hose.
    2. A01180LE01

      Inspect the check valve.

      Text in Illustration
      *1 Fuel tank vent tube assembly (Canister)
      *2 No. 1 check valve
      *3 No. 2 check valve
      *4 Cutoff valve (Fuel suction tube assembly)
      *5 Cutoff valve (Fuel tank vent tube assembly)
      *6 Fuel pump
      *7 No. 1 charcoal canister outlet hose
      *8 Rear fuel emission tube
      *9 Fuel tank

      1. A011ANZE01

        Open the fuel tank cap, close the No. 1 charcoal canister outlet hose, and apply the compressed air from the purge hose.

        OK
        Air does not flow at first. By gradually increasing the pressure, air flows when the pressure in the port reaches the specified level.
      2. A0118KRE01

        Open the fuel tank cap, close the No. 1 charcoal canister outlet hose, and apply a vacuum from the purge hose, using a vacuum pump.

        OK
        The vacuum is maintained at first. By gradually increasing the vacuum, air flows and the vacuum decreases after the vacuum reaches the specified level.