КЛАПАН РОГ СНЯТИЕ


  1. REMOVE WINDSHIELD WIPER MOTOR AND LINK


    1. Remove the windshield wiper motor and link Click here.

  2. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY


    1. Remove the throttle body assembly Click here.

  3. REMOVE INTAKE MANIFOLD


    1. A011BVW

      Disconnect the vacuum switching valve connector.

    2. Loosen the hose clamp and disconnect the fuel vapor feed hose.

    3. Disconnect the 2 water by-pass hoses from the intake manifold.

    4. A0117YN

      Disconnect the vacuum sensor connector.

    5. Disengage the 4 wire harness clamps and separate the wire harness from the intake manifold.

    6. Remove the 2 bolts.

    7. A0116VX

      Loosen the hose clamp and disconnect the union to check valve hose.

    8. Disconnect the vacuum hose.

    9. Loosen the hose clamp and disconnect the ventilation hose.

    10. A011BHX

      Remove the 2 bolts, 2 nuts, and intake manifold.

    11. A011947

      Remove the gasket from the intake manifold.

    12. A0117G9

      Remove the stud bolt from the intake manifold.

  4. REMOVE NO. 1 INTAKE MANIFOLD INSULATOR

    A0117GE

    1. Remove the nut, the 2 bolts and the intake manifold insulator.

    2. Remove the gasket from the cylinder head.

  5. REMOVE EGR VALVE ASSEMBLY


    1. A0118LA

      Disconnect the EGR valve connector.

    2. Separate the water by-pass hose.

    3. A011BD9

      Rotate the EGR valve to avoid contact with the delivery pipe, and remove the EGR valve.

    4. Remove the gasket.