ОХЛАДИТЕЛЬ РОГ УСТАНОВКА


  1. INSTALL EGR PIPE CONNECTOR


    1. A011BBB

      Install the 2 gaskets and EGR by-pass valve to the EGR with cooler pipe assembly.

    2. Install the EGR pipe connector with the bolt and 2 nuts.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }

  2. INSTALL EGR WITH COOLER PIPE ASSEMBLY


    1. A0118NA

      Install 2 new gaskets.

    2. Install the EGR cooler assembly with the 4 bolts and 2 nuts.

      Torque:
      23 N*m  { 235 kgf*cm, 17 ft.*lbf }
    3. A0118U8

      Install the No. 1 vacuum transmitting pipe sub-assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }
    4. A0118OME01

      Connect the vacuum hose, No. 2 oil cooler hose and No. 2 water by-pass hose.

    5. A011AWW

      Engage the 2 wire harness clamps and connect the 2 connectors.

    6. Install the wire harness with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }
    7. A011B7X

      Engage the wire harness clamp and connect the 2 connectors.

  3. INSTALL ENGINE COVER ASSEMBLY


    1. A011ACJ

      Установите крышку двигателя и введите в зацепление 3 захвата.

  4. INSTALL AIR CLEANER HOSE ASSEMBLY

    A0119ZOE02
    Текст на рисунке
    *1 Метка, нанесенная краской

    1. Установите шланг воздушного фильтра.

      Note

      Установите фиксатор таким образом, чтобы захваты были совмещены с нанесенной краской меткой на шланге.

  5. INSTALL RADIATOR ASSEMBLY


    1. Install the radiator assembly Click here.

  6. INSPECT FOR EXHAUST GAS LEAK