БЛОК ЦИЛИНДРОВ ЗАМЕНА


  1. REPLACE STRAIGHT PIN


    1. Remove the 9 straight pins indicated in the illustration from the cylinder block sub-assembly.

      A0116XQE01

    2. Using a plastic-faced hammer, tap in 9 new straight pins.

      A0118ECE01

  2. REPLACE STUD BOLT


    1. A011BJN

      Using "TORX" socket wrench E6, remove the 2 stud bolts.

    2. A011BJN

      Using "TORX" socket wrench E6, Install the 2 stud bolts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }