БЛОК ЦИЛИНДРОВ ЗАМЕНА


  1. REPLACE PIN

    Note

    It is not necessary to remove the straight pins unless they are being replaced.


    1. Remove the 6 straight pins and 2 ring pins.

    2. Using a plastic hammer, tap in the 6 straight pins and 2 ring pins.

      A0119OEE01
      Standard Protrusion
      Item Protrusion
      Pin A 7.0 to 8.0 mm (0.276 to 0.315 in.)
      Pin B 6.0 to 7.0 mm (0.236 to 0.276 in.)
      Pin C 8.0 to 9.0 mm (0.315 to 0.354 in.)
      Pin D 4.5 to 5.5 mm (0.177 to 0.217 in.)