ПРИВОДНОЙ РЕМЕНЬ СНЯТИЕ

Tech Tips

Use a Toyota genuine belt or an equivalent high strength belt when replacing the belt. If a high strength belt is not used, the durability of the belt may be insufficient. A high strength belt is reinforced with an aramid core and is stronger than the other belts with PET (polyester) or PEN (polyethylene naphthalate) core.


  1. REMOVE NO. 3 ENGINE UNDER COVER

    A01181U

    1. Снимите 3 фиксатора и защиту картера двигателя № 3.

  2. REMOVE NO. 1 COOLER COVER (w/ No. 1 Cooler Cover)

    A0119EA

    1. Remove the 2 nuts and the No. 1 cooler cover.

  3. REMOVE NO. 4 ENGINE COVER (w/ No. 4 Engine Cover)

    A0117VM

    1. Remove the 2 bolts, nut and the No. 4 engine cover.

  4. REMOVE NO. 1 V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT (w/ Air Conditioning System)

    A0119GZE01

    1. Loosen bolts A and B.

    2. Remove the No. 1 V belt.

  5. REMOVE FAN AND GENERATOR V BELT

    A011A8N

    1. Release the V belt tension by turning the V-ribbed belt tensioner counterclockwise, and remove the V belt from the V-ribbed belt tensioner.

    2. While turning the V-ribbed belt tensioner counterclockwise, align the holes, and then insert a 5 mm bi-hexagon wrench into the holes to fix the V-ribbed belt tensioner.