ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ ПРОВЕРКА


  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR


    1. A011BOLE12
      Text in Illustration
      *1

      Component without harness connected

      (Engine Coolant Temperature Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (E2) - 2 (THW) 20°C (68°F) 2.32 to 2.59 kΩ
      1 (E2) - 2 (THW) 80°C (176°F) 0.310 to 0.326 kΩ

      Note

      When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

      If the result is not as specified, replace the engine coolant temperature sensor.