ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА УСТАНОВКА


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. A0119W3

      Install the crankshaft position sensor and No. 1 cylinder block insulator with the bolt and nut.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }
    2. A0118RL

      Engage the 2 wire harness clamps and install the crankshaft position sensor wirer harness.

    3. Connect the crankshaft position sensor connector.

  2. INSTALL EXHAUST MANIFOLD CONVERTER


    1. Install the exhaust manifold converter sub-assembly Click here.