ДАТЧИК ПОЛОЖЕНИЯ КОЛЕНЧАТОГО ВАЛА СНЯТИЕ


  1. REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. Remove the exhaust manifold converter sub-assembly Click here.

  2. REMOVE CRANKSHAFT POSITION SENSOR


    1. A0118RL

      Disconnect the crankshaft position sensor connector.

    2. Disengage the 2 wire harness clamps and separate the crankshaft position sensor wire harness.

    3. A0119W3

      Remove the bolt and nut and the crankshaft position sensor and No. 1 cylinder block insulator.