ПОДОГРЕВАЕМЫЙ КИСЛОРОДНЫЙ ДАТЧИК ПРОВЕРКА


  1. INSPECT NO. 2 OXYGEN SENSOR


    1. A011BLNE02
      Text in Illustration
      *1

      Component without harness connected

      (No. 2 Oxygen Sensor)

      Check the resistance


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 (HT1B) - 2 (+B) 20 °C (68 °F) 11 to 16 Ω
        1 (HT1B) - 4 (E2) Always 10 kΩ or higher

        If the result is not as specified, replace the No. 2 oxygen sensor.