ДАТЧИК СОСТАВА ТОПЛИВОВОЗДУШНОЙ СМЕСИ УСТАНОВКА


  1. INSTALL AIR FUEL RATIO SENSOR


    1. A011AFUE01

      Using SST, install the air fuel ratio sensor to the exhaust manifold.

      SST
      09224-00010
      Torque:
      without SST
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).

      • The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) Click here.

      • This torque value is effective when SST is parallel to the torque wrench.

    2. Install the wire harness clamp and connect the air fuel ratio sensor connector.

  2. INSTALL AIR CLEANER HOSE ASSEMBLY

    A0118SJE01
    Text in Illustration
    *1 Upper Side
    *2 LH Side
    *3 Front Side

    1. Install the air cleaner hose with the 2 hose clamps.

      Tech Tips

      Install the clip as shown in the illustration.

    2. Connect the No. 2 ventilation hose.