AIR MIX CONTROL SERVO MOTOR INSTALLATION


  1. INSTALL AIR MIX DAMPER SERVO SUB-ASSEMBLY

    A011A3ME01
    Text in Illustration
    *1 Reference position

    1. Align the reference position and the claw, and then install the air mix damper servo.

    2. Connect the connector.

  2. INSTALL INSTRUMENT LOWER PANEL (for LHD without Cold Area Specification Vehicles)


    1. Install the instrument lower panel Click here.

  3. INSTALL NO. 1 INSTRUMENT PANEL LOWER AIR BAG ASSEMBLY (for RHD without Cold Area Specification Vehicles)


    1. Install the No. 1 instrument panel lower air bag assembly Click here.

  4. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY (for RHD without Cold Area Specification Vehicles)

    Tech Tips

    Use the same procedure as for the LHD side Click here.

  5. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY (for Cold Area Specification Vehicles)

    Tech Tips

    Use the same procedure as for the No. 2 side Click here.

  6. INSTALL INSTRUMENT LOWER PANEL (for Cold Area Specification Vehicles)


    1. Install the instrument lower panel Click here.