FRONT BLOWER MOTOR INSTALLATION


  1. INSTALL BLOWER W/FAN MOTOR SUB-ASSEMBLY

    A0118MC

    1. Install the blower w/fan motor with the 3 screws.

    2. Connect the connector.

  2. INSTALL NO. 2 AIR DUCT SUB-ASSEMBLY

    A0118S6

    1. Engage the 3 claws and install the air duct.

  3. INSTALL CLUTCH PEDAL SUB-ASSEMBLY (for RHD Manual Transaxle)


    1. Install the clutch pedal sub-assembly Click here.

  4. INSTALL NO. 3 AIR DUCT SUB-ASSEMBLY

    A0119AW

    1. Engage the 3 claws and install the air duct.

    2. Install the clip.

    3. A011AN2

      Connect the connector.

      Tech Tips

      If the vehicle is equipped with stop and start system, connect the connector.

  5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL (for LHD)

    Tech Tips

    Use the same procedure as for the No. 2 side Click here.

  6. INSTALL COWL SIDE TRIM BOARD LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side Click here.

  7. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side Click here.

  8. INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

    Tech Tips

    Use the same procedure as for the RH side Click here.