REAR SEAT INNER BELT ASSEMBLY (for RH Side) INSTALLATION


  1. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. A0119RX

      Install the rear seat inner belt with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    2. A011ADA

      Engage the 2 wiring harness clamps.

    3. Connect the rear seat inner belt connector.

    4. A0118KM

      Engage the rear seat inner belt buckle switch connector and 2 wiring harness clamps.

  2. INSTALL REAR SEAT BELT BUCKLE UPPER COVER


    1. A011983

      Engage the 2 claws and the clip and install the rear seat belt buckle upper cover.

    2. A0117HS

      Tighten the 2 screws.

  3. INSTALL REAR SEAT ASSEMBLY


    1. A0118NSE01

      Insert the 2 locating pins through the 2 body holes and install the rear seat.

    2. Install the 6 bolts in the sequence shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    3. Connect the rear seat inner belt connector.

  4. INSTALL REAR SEAT HEADREST ASSEMBLY