REAR SEAT INNER BELT ASSEMBLY (for RH Side) INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY


    1. A0118B8E01

      Check the resistance.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        A1 -A 2 Tongue plate fastened 10 kΩ or higher
        A1 - A2 Tongue plate released Below 1 Ω
        A3 - B1 Always Below 1 Ω
        A4 - B2 Always Below 1 Ω

        If the result is not as specified, replace the rear seat inner belt.