AIRBAG CUT-OFF SWITCH INSTALLATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. INSTALL AIRBAG CUT-OFF SWITCH

    A01187I

    1. Engage the 2 claws of the cut-off switch with the instrument panel lower.

  2. INSTALL NO. 1 LOWER INSTRUMENT PANEL FINISH PANEL

    A0118KA

    1. Engage the 3 claws and connect the hood lock control lever.

    2. A011AQB

      Connect the connector.

    3. Engage the 2 claws and connect the DLC3 connector.

    4. A011AI9

      Engage the 2 claws and 7 clips.

    5. Install the lower No. 1 instrument panel finish panel with the 2 <C> bolts.

  3. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  4. INSTALL COWL SIDE TRIM BOARD LH

    Tech Tips

    Use the same procedure as for the RH side.


    1. Install the cowl side trim board LH Click here.

  5. INSTALL FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.


    1. Install the front door scuff plate LH Click here.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  7. INSPECT SRS WARNING LIGHT


    1. Inspect SRS warning light Click here.