STEERING PAD INSTALLATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. INSTALL STEERING PAD

    A0116YBE01

    Note

    Do not use a steering pad that has been dropped.

    Text in Illustration
    *1 Locking Button

    1. Confirm that the ignition switch is off.

    2. Confirm that the cable to the negative battery terminal is disconnected.

      CAUTION:

      Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    3. Connect the horn terminal.

    4. Connect the airbag connector.

      Note


      • Match the color of the airbag connector with that of the steering pad assembly, and install the airbag connector.

      • Securely lock the locking button.

    5. A011BHG

      Engage the pins into the spring clips behind the horn button assembly to install the steering pad.

      Note

      Pull the horn button assembly to ensure that it is securely engaged.

      Tech Tips

      Install the right-side pin of the horn button assembly first.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  3. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.