FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Click here.


  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

    A0117MM

    1. Engage the 6 hooks so that the connector side faces the outside of the vehicle, and install the front passenger airbag.

    2. Install the 2 screws.

    3. Install the wire harness onto the claw of the instrument panel.

  2. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY

    A011AAFE01
    Text in Illustration
    *1 Locking Button

    1. Connect the airbag connector to install the instrument panel wire.

      Note

      Lock the locking button securely.

  3. INSTALL UPPER INSTRUMENT PANEL


    1. Install the upper instrument panel Click here.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

  5. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.