AIRBAG SYSTEM, Diagnostic DTC:B1630/23, B1632/81

DTC Code DTC Name
B1630/23 Driver Side Rear Airbag Sensor Malfunction
B1632/81 Lost Communication with Driver Side Rear Airbag Sensor

DESCRIPTION

for DTC B1630/23:

The driver side - side airbag sensor (for rear side) consists of the safing sensor, the diagnostic circuit, the lateral deceleration sensor, etc.

If the center airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1630/23 is recorded when a malfunction is detected in the driver side - side airbag sensor (for rear side) circuit.

for DTC B1632/81:

The circuit for the driver side - side collision sensor (to determine deployment of the curtain shield airbag (driver side) is composed of the center airbag sensor assembly, driver side - side airbag sensor (for front side) and driver side - side airbag sensor (for rear side).

The driver side - side airbag sensor (for front side) and driver side - side airbag sensor (for rear side) detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be deployed.

DTC B1632/81 is recorded when a malfunction is detected in the circuit for the driver side - side collision sensor (for rear side) (to determine deployment of the curtain shield airbag (driver side).

DTC No. DTC Detection Condition Trouble Area

B1630/23

B1632/81

When one of following conditions is met:


  • Driver side - side airbag sensor (for rear side) malfunction

  • Center airbag sensor assembly malfunction

  • Driver side - side airbag sensor (for rear side)

  • Center airbag sensor assembly

WIRING DIAGRAM

A0119GWE11
A0119GWE17

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK DRIVER SIDE - SIDE AIRBAG SENSOR (FOR REAR SIDE)

    A0118YEE02
    Text in Illustration
    *a Passenger Side - Side Airbag Sensor (for Rear Side)
    *b Driver Side - Side Airbag Sensor (for Front Side)

    1. Turn the ignition switch off.

    2. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    3. Interchange the driver side - side airbag sensor (for rear side) with passenger side - side airbag sensor (for rear side) and connect the connectors to them.

    4. Connect the cable to the negative battery terminal, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in the memory Click here.

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 60 seconds.

    9. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1630/23, B1632/81, B1635/24 and B1637/82 are not output A
      DTC B1635/24 or B1637/82 is output B
      DTC B1630/23 or B1632/81 is output C

      Tech Tips

      DTCs other than B1630/23, B1632/81, B1635/24 and B1637/82 may be output at this time, but they are not related to this check.

    10. Turn the ignition switch off.

    11. Disconnect the cable from the negative (-) battery terminal, and wait for at least 90 seconds.

    12. Return the driver side - side airbag sensor (for rear side) and passenger side - side airbag sensor (for rear side) to their original positions and connect the connectors to them.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE DRIVER SIDE - SIDE AIRBAG SENSOR (FOR REAR SIDE) Click here

    C

    REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here