AIRBAG SYSTEM, Diagnostic DTC:B1695/16, B1697/82

DTC Code DTC Name
B1695/16 Passenger Side Door Side Airbag Sensor Malfunction
B1697/82 Lost Communication with Passenger Side Door Side Airbag Sensor

DESCRIPTION

for DTC B1695/16:

The passenger side - side airbag sensor (for front side) consists of the safing sensor, the diagnostic circuit, the lateral deceleration sensor, etc.

If the center airbag sensor assembly receives signals from the lateral deceleration sensor, it determines whether the SRS should be activated.

DTC B1695/16 is recorded when a malfunction is detected in the passenger side - side airbag sensor (for front side) circuit.

for DTC B1697/82:

The circuit for the passenger side - side collision sensor (to determine deployment of the front seat side airbag (passenger side) and curtain shield airbag (passenger side)*1) is composed of the center airbag sensor assembly, passenger side - side airbag sensor (for front side) and passenger side - side airbag sensor (for rear side)*1.

The passenger side - side airbag sensor (for front side) and passenger side - side airbag sensor (for rear side)*1 detect impacts to the vehicle and send signals to the center airbag sensor assembly to determine if the airbag should be deployed.

DTC B1697/82 is recorded when a malfunction is detected in the circuit for the passenger side - side collision sensor (for front side) (to determine deployment of the front seat side airbag (passenger side) and curtain shield airbag (passenger side)*1).

*1: w/ Curtain Shield Airbag

DTC No. DTC Detection Condition Trouble Area

B1695/16

B1697/82

When one of following conditions is met:


  • Passenger side - side airbag sensor (for front side) malfunction

  • Center airbag sensor assembly malfunction

  • Passenger side - side airbag sensor (for front side)

  • Center airbag sensor assembly

WIRING DIAGRAM

A0119GWE10
A0119GWE12

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK PASSENGER SIDE - SIDE AIRBAG SENSOR (FOR FRONT SIDE)

    A0119WVE02
    Text in Illustration
    *A for LHD
    *B for RHD
    *a Driver Side - Side Airbag Sensor (for Front Side)
    *b Center Airbag Sensor Assembly

    1. Turn the ignition switch off.

    2. Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.

    3. Interchange the passenger side - side airbag sensor (for front side) with the driver side - side airbag sensor (for front side) and connect the connectors to them.

    4. Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

    5. Turn the ignition switch to ON, and wait for at least 60 seconds.

    6. Clear the DTCs stored in the memory Click here.

    7. Turn the ignition switch off.

    8. Turn the ignition switch to ON, and wait for at least 60 seconds.

    9. Check for DTCs Click here.

      Result
      Result Proceed to
      DTC B1690/15, B1692/81, B1695/16 and B1697/82 are not output. A
      DTC B1695/16 or B1697/82 is output. B
      DTC B1690/15 or B1692/81 is output. C

      Tech Tips

      DTCs other than B1690/15, B1692/81, B1695/16 and B1697/82 may be output at this time, but they are not related to this check.


    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here

    C

    REPLACE PASSENGER SIDE - SIDE AIRBAG SENSOR (FOR FRONT SIDE) Click here