TRANSPONDER KEY AMPLIFIER REMOVAL


  1. REMOVE STEERING COLUMN LOWER COVER

    Note

    Removing the lower steering column cover in the incorrect order will cause the lower steering column cover to break.


    1. Release the tilt lever.

    2. A011AYN

      Push the right and left sides of the lower steering column cover, and disengage the 2 claws.

      Note

      Completely disengage the claws.

    3. Insert your fingers into the tilt lever opening of the lower steering column cover and disengage the claw.

      Tech Tips

      Open the claw to disengage it.

    4. A01199AE01
      Text in Illustration
      *1 Protective Tape

      Turn the handle 90° to the right, disengage the right claw using a screwdriver with its tip wrapped in protective tape, and pull the lower steering column cover as shown by the arrow.

    5. Turn the handle 90° to the left, disengage the left claw using a screwdriver with its tip wrapped in protective tape, and pull and remove the lower steering column cover as shown by the arrow.

  2. REMOVE STEERING COLUMN UPPER COVER


    1. A0117BX

      Disengage the 3 claws and remove the upper steering column cover.

  3. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A0118TME01
      Text in Illustration
      *1 Protective Tape

      Disconnect the connector.

    2. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and remove the transponder key amplifier.