ELECTRICAL KEY OSCILLATOR (for Rear Side) REMOVAL


  1. REMOVE REAR SEAT ASSEMBLY (w/ Rear Seat Assembly)


    1. Remove the rear seat assembly Click here.

  2. REMOVE REAR SEAT UNDER TRAY


    1. Remove the rear seat under tray.

  3. REMOVE REAR SEAT SUB FLOOR BOARD ASSEMBLY (w/o Rear Seat Assembly)

    A0118Y8

    1. Remove the 6 bolts and rear floor board.

  4. REMOVE FRONT DOOR SCUFF PLATE RH

    A011AJ3

    1. Disengage the 9 claws and remove the front door scuff plate.

  5. REMOVE FRONT DOOR SCUFF PLATE LH

    Tech Tips

    Use the same procedure as for the RH side.

  6. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. Remove the front door opening trim weatherstrip to the extent that the side No. 1 trim RH can be removed.

  7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. Remove the front door opening trim weatherstrip to the extent that the side No. 1 trim LH can be removed.

  8. REMOVE REAR DECK TRIM COVER

    A0116Z2

    1. Remove the 2 clips.

    2. Disengage the 6 claws and remove the rear deck trim cover.

  9. REMOVE BACK DOOR WEATHERSTRIP


    1. Remove the back door weatherstrip to the extent that the side No. 1 trim RH and the side No. 1 trim LH can be removed.

  10. REMOVE DECK TRIM SIDE BELT HOLE COVER RH

    A011AN1

    1. Disengage the 5 claws and remove the deck trim side belt hole cover.

  11. REMOVE DECK TRIM SIDE BELT HOLE COVER LH

    Tech Tips

    Use the same procedure as for the RH side.

  12. REMOVE SIDE NO. 1 TRIM ASSEMBLY RH

    A0119QR

    1. Disengage the 6 clips and remove the side No. 1 trim.

  13. REMOVE SIDE NO. 1 TRIM ASSEMBLY LH

    Tech Tips

    Use the same procedure as for the RH side.

  14. REMOVE LUGGAGE COMPARTMENT TRAY


    1. Remove the luggage compartment tray.

  15. REMOVE INDOOR ELECTRICAL KEY OSCILLATOR


    1. A011BP3

      Disengage the 5 clips and peel back the floor carpet.

      Tech Tips

      Peel back the floor carpet enough to allow removal and installation of the indoor electrical key oscillator.

    2. Disconnect the connector.

    3. A011AJW

      Disengage the clamp and remove the indoor electrical key oscillator.