LIGHTING SYSTEM DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. According to the display on the tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Ignition switch signal/ ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 -
      IG SW Ignition switch signal/ ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch ACC or off

      		 -
      Back Door Courtesy SW Back door courtesy switch signal/ ON or OFF

      ON: Back door is open

      OFF: Back door is closed

      		 -
      FR Door Courtesy Front RH door courtesy switch signal/ ON or OFF

      ON: Front RH door is open

      OFF: Front RH door door is closed

      		 -
      FL Door Courtesy Front LH door courtesy switch signal/ ON or OFF

      ON: Front LH door is open

      OFF: Front LH door is closed

      		 -
      I/L ON W/Door Key Unlock Interior light ON with unlock / ON or OFF Customize setting displayed -
      Lighting Time Lighting Time / 7.5s or 15s or 30s Customize setting displayed -
      Room Light when Aprchd Light the map light when vehicle is approached bay its owner with smart key / ON or OFF Customize setting displayed -
      I/L when ACC OFF Light the I/L when ACC OFF/ON or OFF Customize setting displayed -

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. According to the display on the tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Normal Condition
      Illuminated Entry System Map light assembly ON/OFF -
      Interior Panel Relay Panel relay ON/OFF -