TRANSMITTER BATTERY (w/o Entry and Start System) REPLACEMENT


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A011B2KE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped in protective tape, pry apart the transmitter housing cover.

      Note

      Do not use excessive force when prying apart the housing cover.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE


    1. A011979

      Remove the door control transmitter module.

  3. REMOVE TRANSMITTER BATTERY


    1. A011AXU

      Disengage the hook and remove the transmitter battery cover.

    2. A0118QA

      Remove the battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.

      • Do not touch the battery with wet hands. Water may cause it to rust.

      • Do not touch or move any components inside the transmitter as this may interfere with its proper operation.

  4. INSTALL TRANSMITTER BATTERY


    1. A011BF6

      Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

      Note


      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Do not bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A011BPI

      Engage the hook and install the transmitter battery cover.

  5. INSTALL DOOR CONTROL TRANSMITTER MODULE


    1. A01196H

      Install the door control transmitter module.

  6. INSTALL TRANSMITTER HOUSING COVER


    1. A011BQ3

      Install the transmitter housing cover onto the transmitter housing case securely.

    2. A0119HP

      After the installation, press any of the transmitter switches. Check that the LED illuminates.