BATTERY CURRENT SENSOR INSPECTION


  1. INSPECT BATTERY CURRENT SENSOR ASSEMBLY

    A0118WVE25
    Text in Illustration
    *a

    Component without harness connected

    (Battery Current Sensor)

    1. Check the resistance of the current sensor.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2(VC5) - 4(E2) Always 0.1 to 10 kΩ
        2(VC5) - 3(IB) Always Below 0.5 kΩ
        3(IB) - 4(E2) Always 0.05 to 10 kΩ

        If the result is not as specified, replace the battery current sensor.

    2. A0118J8E04
      Text in Illustration
      *a

      Component without harness connected

      (Battery Current Sensor)

      Check the resistance of the thermistor.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1(THB) - 4(E2) 20°C (68°F) to 30°C(86°F) 1.5 to 2.5 kΩ

        If the result is not as specified, replace the battery current sensor.

        Tech Tips

        The "Condition" indicates the temperature in the vicinity of the sensor, not of the actual sensor itself.